Changes to Step #16
Edit by Chayton Ritter —
Edit approved by Chayton Ritter
- Before
- After
- Unchanged
Step Lines
| [title] Apply isopropyl alcohol to the logic board | |
| [* icon_note] The adhesive that secures the logic board is very strong. To remove the board, you must first weaken the adhesive using high-strength (>90%) isopropyl alcohol. | |
| [* black] Prop the left side of the iPad up against an object so the isopropyl alcohol can flow under the logic board. | |
| [* black] Apply isopropyl alcohol along the left edge of the logic board. | |
| + | [* icon_caution] Be careful if you're using a syringe with a needle or other sharp instrument to dispense isopropyl alcohol—a punctured or bent battery may leak dangerous chemicals or cause a fire. |
| [* black] Let the alcohol soak for one minute to soften the adhesive under the logic board. |