Fix Your Stuff Community Store

Changes to Step #19

Edit by Chayton Ritter —

Edit approved by Chayton Ritter

Before
After
Unchanged

Step Lines

[title] Release the logic board
-[* black] Use an opening pick to pry up the left side of the logic board.
+[* black] Slide an opening pick under the left edge of the logic board to loosen it.
+ [* black] Pry against the frame underneath the logic board to separate the adhesive.
[* icon_caution] Don't forcefully lever against the battery—a punctured or bent battery may leak dangerous chemicals or cause a fire.
- [* icon_note] If it's difficult to lift the logic board, apply additional isopropyl alcohol and wait one minute.
+ [* icon_note] If the adhesive is still too strong to lift up the logic board, apply some additional isopropyl alcohol and wait one minute.