Changes to Step #8
Edit by Chayton Ritter —
Edit approved by Chayton Ritter
- Before
- After
- Unchanged
Step Lines
| - | [title] Slice the left adhesive |
|---|---|
| + | [title] Separate the left adhesive |
| + | [* icon_caution] Don't insert the pick more than 3 mm or you'll damage the LCD. |
| [* black] Insert a new opening pick in the gap you just created. | |
| - | [* black] Slice the left edge adhesive. |
| - | [* icon_caution] Don't insert the pick more than 3 mm or you'll damage the LCD. |
| + | [* black] Slide the opening pick along the left edge to release the adhesive. |
| [* black] Leave the pick in the bottom left corner to prevent the adhesive from re-sealing. |