Changes to Step #1
Edit by Chayton Ritter —
Edit approved by Chayton Ritter
- Before
- After
- Unchanged
Step Lines
| + | [title] Unscrew the display and digitizer cable brackets |
|---|---|
| + | [* black] Use a Phillips PH00 screwdriver to remove the three screws securing the display and digitizer cable brackets to the logic board: |
| + | [* red] Two 1.1 mm screws |
| + | [* orange] One 1.5 mm screw |
Image 1
No previous image
Added
Image 2
No previous image
Added