Changes to Step #5
Edit by Chayton Ritter —
Edit approved by Chayton Ritter
- Before
- After
- Unchanged
Step Lines
| [title] Remove the rear camera | |
| [* black] Lay the iPad screen side up. | |
| - | [* black] Use the flat end of a spudger to pry up |
| - | [* icon_note] If it's |
| + | [* black] Use the flat end of a spudger to pry up the rear camera. |
| + | [* icon_note] If it's difficult to pry the camera up, apply a heated iOpener, wait two minutes, and try again. |
| [* icon_caution] Don't use isopropyl alcohol to weaken the adhesive or you'll damage the rear camera. | |
| [* black] Remove the rear camera. | |
| + | [* icon_reminder] During reassembly, you can reuse the adhesive in the frame if it's still intact and clean. |
| + | [* icon_reminder] If the adhesive is damaged or dirty, use tweezers to remove it and use a small piece of [product|IF317-072|Tesa tape|new_window=true] to secure the rear camera to the frame. |