Changes to Step #12
Edit by Chayton Ritter —
Edit approved by Chayton Ritter
- Before
- After
- Unchanged
Step Lines
| [title] Lift the logic board | |
| [* black] Lay the iPad screen side up. | |
| - | [* black] Slide the flat end of a spudger under the |
| + | [* black] Slide the flat end of a spudger under the cellular wireless connector until the logic board lifts and the battery blocker card strips are loose. |
| [* icon_caution] Don't force the spudger in or pry up. If it's difficult to insert or slide the spudger, apply more heat. Alternatively, a few drops of high-strength (>90%) isopropyl alcohol may be used to soften the adhesive. | |
| [* black] Leave the spudger in to prevent the adhesive from re-sealing. |