Fix Your Stuff Community Store

Changes to this Step

Edit by Chayton Ritter —

Edit approved by Chayton Ritter

Before
After
Unchanged

Step Lines

[title] Peel back the Smart Connector cable
[* icon_note] The Smart Connector cable is secured to the frame with some weak adhesive.
[* black] Insert the flat end of a spudger under the Smart Connector cable.
[* black] Peel back the Smart Connector Cable.
- [* icon_note] If it's hard to peel back the cable, flip the iPad over and heat the Smart Connector to weaken the adhesive.
+ [* icon_note] If the cable is difficult to remove, high-strength (>90%) isopropyl alcohol can be used to soften the adhesive.