Fix Your Stuff Community Store

Changes to Step #33

Edit by Chayton Ritter —

Edit approved by Chayton Ritter

Before
After
Unchanged

Step Lines

[title] Release the logic board adhesive
[* black] Insert an opening pick under the right edge of the logic board.
[* black] Pry up and slide along the right edge of the logic board to release it.
-[* icon_note] If it's difficult to insert or slide the pick, apply more isopropyl alcohol and wait one minute.
+[* icon_caution] Bending or warping the logic board could lead to permanent damage. If it's difficult to insert or slide the pick, apply more isopropyl alcohol and wait one minute.