Changes to Step #25
Edit by Chayton Ritter —
Edit approved by Chayton Ritter
- Before
- After
- Unchanged
Step Lines
| + | [title] Separate the Smart Connector Cable |
|---|---|
| [* icon_note] The Smart Connector cable is secured to the frame with weak adhesive. | |
| [* black] Insert the flat end of a spudger under the Smart Connector cable. | |
| [* black] Slide the flat end of a spudger under the cable to separate it from the frame. | |
| [* icon_note] If the cable is difficult to remove, use a few drops of high-strength (>90%) isopropyl alcohol to soften the adhesive. |