Changes to Step #2
Edit by Sam Goldheart —
Edit approved by Sam Goldheart
- Before
- After
- Unchanged
Step Lines
[* black] Unplug the left speaker cable from its socket on the logic board. Be sure to pull straight up out of the socket. | |
[* black] De-route the cable from the gap between the hard drive and logic board. | |
- | [* icon_note] If the gap between the hard drive and logic board is too |
+ | [* icon_note] If the gap between the hard drive and logic board is too narrow for the speaker cable, disconnect it and leave the cable in place. |