Skip to main content

Changes to Step #2

Edit by johann beda

Edit declined by Adam O'Camb

Before
After
Unchanged

Step Lines

-[* black] Unplug the left speaker cable from its socket on the logic board. Be sure to pull straight up out of the socket.
+[* black] Unplug the left speaker cable from its socket on the logic board. Be sure to pull straight up out of the socket, parallel with the board towards the top of the iMac.
[* black] De-route the cable from the gap between the hard drive and logic board.
[* icon_note] If the gap between the hard drive and logic board is too narrow for the speaker cable, disconnect it and leave the cable in place.