Fix Your Stuff Community Store

Changes to Step #2

Edit by Adam O'Camb —

Edit approved by Adam O'Camb

Before
After
Unchanged

Step Lines

-[* black] Unplug the left speaker cable from its socket on the logic board. Be sure to pull straight up out of the socket.
+[* black] Unplug the left speaker cable by pulling it straight up out of its socket on the logic board.
[* black] De-route the cable from the gap between the hard drive and logic board.
[* icon_note] If the gap between the hard drive and logic board is too narrow for the speaker cable, disconnect it and leave the cable in place.