Changes to Step #6
Edit by Sam Goldheart —
Edit approved by Sam Goldheart
- Before
- After
- Unchanged
Step Lines
[* black] Lift the left speaker straight up and remove it from the iMac. | |
- | [* icon_note] If the gap between the hard drive and logic board was too thin to free the speaker cable earlier, gently pull it free as you remove the speaker. It will help to push from the connector end as you pull from the speaker end. |
+ | [* icon_note] If the gap between the hard drive and logic board was too narrow to free the speaker cable earlier, gently pull it free as you remove the speaker. |
+ | [* black] Push from the connector end as you pull from the speaker end to thread the cable under the hard drive's right bracket. |