Changes to Step #1
Edit by Clay Eickemeyer —
Edit approved by Clay Eickemeyer
- Before
- After
- Unchanged
Step Lines
[title] Unfasten the midframe assembly | |
[* icon_note] If there's a [link|https://guide-images.cdn.ifixit.com/igi/2yFEOHJo3pFruk3W.full|white sticker covering one of the top screws|new_window=true], pierce through it with the screwdriver or use tweezers to remove it. | |
- | [* red] Use a Torx T9 Security screwdriver to remove the six 9 mm-long screws securing the midframe assembly. |
+ | [* red] Use a Torx T8 Security screwdriver to remove the six 9 mm-long screws securing the midframe assembly. |
+ | [* icon_note] Depending on the age and condition of your bit, a Torx T9 driver may fit better. |