Changes to Step #6
Edit by Tobias Isakeit —
Edit approved by Tobias Isakeit
- Before
- After
- Unchanged
Step Lines
| + | [title] Insert an opening pick |
|---|---|
| + | [* black] Apply a suction handle to the bottom edge of the screen, while avoiding the very edge of the glass. |
| + | [* black] Pull up on the suction handle with firm, constant pressure to create a slight gap between the front panel and rear case. |
| + | [* black] Insert an opening pick into the gap. |
| + | [* icon_note] The adhesive holding the screen in place is very strong; creating this initial gap takes a significant amount of force. If you're having a hard time opening a gap, apply more heat, and gently rock the screen up and down to weaken the adhesive until you create enough of a gap to insert your opening pick. |
Image 1
No previous image
Added
Image 2
No previous image
Added
Image 3
No previous image
Added