Changes to Step #6
Edit by Arthur Shi —
Edit approved by Arthur Shi
- Before
- After
- Unchanged
Step Lines
| [title] Insert an opening pick | |
| [* black] Apply a suction handle to the bottom edge of the screen, while avoiding the very edge of the glass. | |
| - | [* black] Pull up on the suction |
| - | [* black] Insert an opening pick into the gap. |
| + | [* black] Pull up on the suction cup with firm, constant pressure to create a slight gap between the screen and the frame. |
| + | [* black] Insert an opening pick into the gap [https://guide-images.cdn.ifixit.com/igi/yjbOEdQCClt32KXc.full|under the screen's plastic bezel|new_window=true]. |
| [* icon_note] The adhesive holding the screen in place is very strong; creating this initial gap takes a significant amount of force. If you're having a hard time opening a gap, apply more heat, and gently rock the screen up and down to weaken the adhesive until you create enough of a gap to insert your opening pick. |