Changes to Step #1
Edit by Chayton Ritter —
Edit approved by Chayton Ritter
- Before
- After
- Unchanged
Step Lines
| + | [title] LiDAR sensor assembly information |
|---|---|
| + | [* icon_note] The LiDAR sensor assembly is paired to the Face ID hardware. You'll need to transfer it to your replacement screen to keep Face ID functionality. The following steps show how to remove the sensor assembly and install it on your replacement screen. |
| + | [* black] The LiDAR sensor assembly is composed of four total sensors: |
| + | [* red] Two ambient light sensors |
| + | [* orange] One proximity sensor |
| + | [* yellow] One microphone |
| + | [* icon_note] You'll need to separate each sensor from the screen before removing the entire assembly. |
Image 1
No previous image
Added
Image 2
No previous image
Added