Fix Your Stuff Community Store

Changes to Step #2

Edit by Carsten Frauenheim —

Edit approved by Carsten Frauenheim

Before
After
Unchanged

Step Lines

-[title] Separate the right mouse foot adhesive
-[* black] Insert an opening pick between the right mouse foot and the lower case.
- [* icon_note] Make sure the pick goes completely underneath the rubber foot and its adhesive pad. These two layers separate easily.
+[title] Separate the left mouse foot adhesive
+[* black] Insert an opening pick between the left foot and the lower case.
+ [* icon_note] Go slowly, and make sure the pick slides underneath both the foot ***and*** its adhesive pad. These layers separate easily.
[* icon_caution] If you plan on reusing your mouse feet, be careful not to crease them or separate them from their adhesive pads.
[* black] Slide your pick under the foot to separate its adhesive until you can grab it with your fingers.