Fix Your Stuff Community Store

Changes to Step #7

Edit by Carsten Frauenheim —

Edit approved by Carsten Frauenheim

Before
After
Unchanged

Step Lines

[title] Separate the battery adhesive
-[* icon_caution] Don't bend or puncture the battery with your tool—a damaged battery is a potential fire hazard.
-[* black] Insert an opening pick between the short edge of the battery and the housing, opposite the battery cable.
-[* black] Slide your pick under the battery and slice the adhesive.
+[* icon_caution] Try not to bend, crease, deform, poke, or puncture the battery with your tool—a damaged battery is a potential fire hazard.
+[* black] Insert your opening pick between the short edge of the battery and its housing, opposite the cable.
+[* black] Slide your pick under the battery to slice the adhesive.
[* icon_note] If the battery feels stuck, slide your pick around the perimeter to slice any remaining adhesive.
+[* black] Pull up to peel the battery away from the adhesive.