Fix Your Stuff Community Store

Changes to Step #8

Edit by Carsten Frauenheim —

Edit approved by Carsten Frauenheim

Before
After
Unchanged

Step Lines

[title] Remove the battery
-[* black] Grab and remove the battery from its housing.
-[* icon_reminder] Before installing a new battery:
- [* black] Remove the old adhesive by rubbing it with your fingers and peeling it off the battery housing.
- [* black] If your new battery doesn't come with adhesive, place [product|IF317-072|double-sided tape|new_window=true] on the battery housing.
- [* black] Orient your new battery so its cables are in the cutout in the corner of the housing. Press the battery firmly into place.
+[* black] Remove the battery.
+[* icon_reminder] To install a new battery:
+ [* black] Use a spudger or your fingers to peel any old adhesive off of the battery housing. The old adhesive shouldn't leave any residue.
+ [* black] If your new battery doesn't come with preinstalled adhesive, place a couple strips of [product|IF317-072|double-sided tape|new_window=true] into the battery housing.
+ [* black] Orient your new battery so its cables route through the cutout in the corner of the housing. Press the battery firmly into place to secure it.