Changes to Step #1
Edit by Clay Eickemeyer —
Edit approved by Clay Eickemeyer
- Before
- After
- Unchanged
Step Lines
| [title] Mark your opening picks | |
| - | [* black] Measure the maximum cutting depth on the tip of an opening pick and mark it with a permanent marker. |
| - | [* black] Use a ruler to measure the tip of an opening pick. |
| - | [* black] Mark the maximum cutting depth with a permanent marker. |
| + | [* icon_note] If inserted too far, an opening pick can cause damage to your device. Create a visual or physical barrier to prevent inserting the pick too far. |
| + | [* black] Measure the desired cutting depth and mark the tip of an opening pick with a permanent marker. |
| + | [* black] Mark the other corners of the pick with different measurements, if necessary. |
| + | [* black] Alternatively, [link|https://guide-images.cdn.ifixit.com/igi/pQGATIGUbViSB4gB.full|tape a coin to a pick|new_window=true] at the desired cutting depth. |