Changes to Step #8
Edit by darth mango —
Edit approved by darth mango
- Before
- After
- Unchanged
Step Lines
| [title] Unstick circuit board from the battery | |
| [* black] Find the junction between the electronic circuit and the earbud battery just below it. | |
| - | [* light_blue] Using an Opening Pick or a very thin plastic tool unstick the circuit board |
| - | [* icon_note] The circuit board sticks directly to the battery |
| + | [* light_blue] Using an Opening Pick or a very thin plastic tool, very gently unstick the circuit board from the battery by inserting the Opening Pick between the circuit board and the battery. |
| + | [* icon_note] The circuit board sticks directly to the negative battery terminal with adhesive. |
| [* icon_caution] Caution: There is a tiny metal contact under the circuit board that makes contact with the battery. Unstick the circuit board gently to avoid damaging this contact. | |
| [* icon_caution] Do not use metal tools in this step as you may short-circuit the battery. | |
| [* black] Once the circuit board is unstuck from the battery, lift it up as shown on the third picture to have enough space to remove the battery. |