Changes to Step #1
Edit by Walter Galan —
Edit approved by Walter Galan
- Before
- After
- Unchanged
Step Lines
| - | [* red] Remove the two 21 mm T10 Torx screws from the left-hand hard drive bracket. |
|---|---|
| - | [* orange] Remove the single 9mm T10 Torx screw. |
| - | [* yellow] Remove the 27 mm T10 Torx screw. |
| + | [* black] Remove the following screws securing the hard drive bracket to the rear enclosure: |
| + | [* red] Two 21 mm T10 Torx screws from the left-hand hard drive bracket. |
| + | [* orange] One 9mm T10 Torx screw. |
| + | [* yellow] One 27 mm T10 Torx screw. |