Changes to Step #1
Edit by Andrew Optimus Goldheart —
Edit approved by Andrew Optimus Goldheart
- Before
- After
- Unchanged
Step Lines
| [* black] Remove the following screws securing the hard drive bracket to the rear enclosure: | |
| [* red] Two 21 mm T10 Torx screws from the left-hand hard drive bracket. | |
| - | [* orange] One |
| + | [* orange] One 9 mm T10 Torx screw. |
| [* yellow] One 27 mm T10 Torx screw. |