Fix Your Stuff Community Store

Changes to Step #20

Edit by Clay Eickemeyer —

Edit approved by Clay Eickemeyer

Before
After
Unchanged

Step Lines

[title] Remove the cover
-[* black] Use tweezers to lift the cover vertically.
+[* black] Use tweezers to angle the cover 90 degrees.
[* black] Unhook the cover from its slot in the logic board.
[* black] Remove the cover.
-[* icon_reminder] During reassembly, insert the cover vertically to re-engage the hook before laying it flat against the press connector.
+[* icon_reminder] During reassembly, insert the cover at a 90-degree angle to re-engage the hook before laying it flat against the press connector.