Changes to Step #20
Step Lines
| [title] Remove the cover | |
| - | [* black] Use tweezers to lift the cover to a 90-degree angle. |
| + | [* black] Use [product|IF145-020|tweezers] to lift the cover to a 90-degree angle. |
| [* black] Unhook the cover from its slot in the logic board. | |
| [* black] Remove the cover. | |
| [* icon_reminder] During reassembly, insert the cover at a 90-degree angle to re-engage the hook before laying it flat against the press connector. |