Changes to Step #5
Edit by Clay Eickemeyer —
Edit approved by Clay Eickemeyer
- Before
- After
- Unchanged
Step Lines
| [title] Unfasten the logic board | |
| - | [* black] Insert wisdom here. |
| + | [* black] Use your [product|IF145-388|standoff driver|new_window=true] to remove the five standoff screws securing the logic board: |
| + | [* red] One 2.9 mm screw |
| + | [* orange] One 3.9 mm screw |
| + | [* yellow] Three 3.5 mm screws |
| + | [* icon_note] If you don't have a standoff driver, you may use a thin flathead driver—but be careful not to strip the shallow notches in the screw heads. |