Changes to Step #1
Edit by Clay Eickemeyer —
Edit approved by Clay Eickemeyer
- Before
- After
- Unchanged
Step Lines
| [title] Remove the back cover screws | |
| - | [* red] Use a T6 Torx driver to remove the eight 5.8 mm |
| + | [* red] Use a T6 Torx driver to remove the eight 5.8 mm‑long screws securing the back cover. |
| [* icon_note] Throughout this repair, [product|IF145-491|keep track of each screw|new_window=true] and make sure it goes back exactly where it came from. |