Changes to Step #1
Edit by Clay Eickemeyer —
Edit approved by Clay Eickemeyer
- Before
- After
- Unchanged
Step Lines
| [title] Unclip the right trigger | |
| [* icon_note] The ***right*** trigger is on your ***left-hand side*** when working on the Steam Deck OLED, as it's laying upside down. | |
| [* icon_note] The trigger clips into place on two pegs on the frame, which double as the hinge. | |
| [* black] Place the flat end of a spudger onto the inside edge of the trigger's right clip. | |
| [* black] Use your fingers to apply pressure on the trigger toward the right. | |
| [* black] Use your spudger to pivot the trigger clip out, away, and up from the peg to unlatch it. | |
| - | [* black] Check to make sure that the trigger spring is properly aligned. Test the trigger action before continuing reassembly. |