Changes to Step #3
Edit by Carsten Frauenheim —
Edit approved by Carsten Frauenheim
- Before
- After
- Unchanged
Step Lines
| [title] Apply new liquid metal | |
| - | [* black] Apply a small drop of liquid metal to the heatsink—about the size of a matchstick head. |
| + | [* black] Apply a small drop of liquid metal to the heatsink (not the APU)—about the size of a matchstick head. |
| [* icon_note] If your liquid metal syringe has multiple applicator heads, use the one with a small, needle-like tip. | |
| - | [* black] Use the spreader that came with your liquid metal or a new cotton swab to push down on and evenly spread the liquid metal across the entire surface. |
| + | [* black] Use the spreader that came with your liquid metal or a new cotton swab to lightly push down on and evenly spread the liquid metal across the entire surface. |
| [* black] If there's excess liquid metal anywhere, use the syringe to suck it back up. |