Changes to Step #4
Edit by Spencer Day —
Edit approved by Spencer Day
- Before
- After
- Unchanged
Step Lines
| - | [* black] Use the same Q-tip to spread a thin layer of residual liquid metal evenly onto the APU. Dab the Q-tip on the heatsink as necessary to transfer liquid metal. |
|---|---|
| + | [* icon_note] You don't need to apply a new drop a liquid metal on the APU—the Q-tip from the previous step should have some liquid metal left on it. |
| + | [* black] Use the same Q-tip to spread a thin layer of liquid metal evenly onto the APU. ''Lightly'' dab the Q-tip on the heatsink as necessary to transfer liquid metal. |