Fix Your Stuff Community Store

Changes to Step #4

Edit by Spencer Day —

Edit approved by Spencer Day

Before
After
Unchanged

Step Lines

-[* icon_note] You don't need to apply a new drop a liquid metal on the APU—the Q-tip from the previous step should have some left on it.
-[* black] Use the same Q-tip to spread a thin layer of liquid metal evenly onto the APU. If you need more liquid metal, ''lightly'' dab the Q-tip on the heatsink to transfer some.
+[* icon_note] You shouldn't need to apply a new drop of liquid metal on the APU, as the cotton swab from the previous step will have some left on it.
+[* black] Use the same cotton swab to spread a thin layer of liquid metal evenly onto the APU. If you need more liquid metal, ''lightly'' dab the cotton swab on the heatsink to transfer some, or apply a very small drop from the syringe.