Changes to Step #2
Edit by Sarah Westberg —
Edit approved by Sarah Westberg
- Before
- After
- Unchanged
Step Lines
| [* red] Use the Phillips #0 screwdriver to remove the two 3.2 mm black screws holding down the cover. | |
| - | [* black] |
| + | [* black] Use the tweezers to carefully remove the silver cover from the backboard. |
| [* icon_note] Under the cover you will see the display cable fused to a rectangular adapter. | |
| [* black] Gently wedge the plastic opening pick in between the display cable and the backboard. | |
| - | [* black] Gently pry up disconnecting the adapter with the display cable from its bracket. |
| + | [* black] Gently pry up, disconnecting the adapter with the display cable from its bracket. |