Changes to Step #1
Edit by Arthur Shi —
Edit approved by Arthur Shi
- Before
- After
- Unchanged
Step Lines
- | [* black] Insert wisdom here. |
---|---|
+ | [* icon_note] The bumper is held in place with clips. |
+ | [* black] Place a finger over the bumper to prevent it from flying across the room when you pry it up. |
+ | [* black] Insert the flat end of a spudger underneath the top edge of the bumper. |
+ | [* black] Pry up to unclip the bumper. |
+ | [* black] Slide the spudger along the seam to release any remaining clips. |