Fix Your Stuff Community Store

Changes to Step #1

Edit by Arthur Shi —

Edit approved by Arthur Shi

Before
After
Unchanged

Step Lines

[title] Pry up the L1 bumper
[* icon_note] The bumper is held in place with clips.
-[* black] Place a finger over the L1 bumper to prevent it from flying across the room when you pry it up.
+[* black] Rest a finger over the L1 bumper to prevent it from flying off when you pry.
[* black] Insert the flat end of a spudger underneath the top edge of the bumper.
[* black] Pry up to unclip the bumper.
[* black] Slide the spudger along the seam to release any remaining clips.