Changes to Step #6
Edit by Arthur Shi —
Edit approved by Arthur Shi
- Before
- After
- Unchanged
Step Lines
| - | [* black] Insert wisdom here. |
|---|---|
| + | [* icon_note] If you don't have an opening tool, skip to the next step. |
| + | [* black] Pull up on the suction handle with strong, steady force. |
| + | [* black] Press the edge of an opening tool into the seam to create an initial gap. |
| + | [* black] If you're having trouble, reheat the edge and try again. |
| + | [* black] Insert the tip of an opening pick into the initial gap. |
| + | [* icon_caution] Don't insert the pick more than ***2 mm***, or you may damage the screen. |