Skip to main content

Changes to Step #12

Edit by Arthur Shi

Edit approved by Arthur Shi

Before
After
Unchanged

Step Lines

-[* icon_note] [link|https://guide-images.cdn.ifixit.com/igi/H1wEjx2c1QMimpxl.full|The screen's FPC (flexible printed circuit) cable sits close to the right edge|new_window=true]. If you insert the pick too deeply, you may damage the FPC.
+[* icon_note] [link|https://guide-images.cdn.ifixit.com/igi/H1wEjx2c1QMimpxl.full|The screen's FPC (flexible printed circuit) sits close to the right edge|new_window=true]. If you insert the pick too deeply, you may damage the FPC.
[* black] Use an iOpener to heat the right edge of the screen for one minute.
[* black] Use an opening pick to slice along the right edge.
[* icon_caution] ***Don't insert the pick more than 2 mm into the seam.***