Changes to Step #9
Edit by Andrew Bookholt —
- Before
- After
- Unchanged
Step Lines
| + | [* icon_note] This step is for anti-glare display machines only. Skip this step if you have a glossy display. |
|---|---|
| + | [* black] Disconnect the Bluetooth cable by pulling the male end straight away from its socket. |
| + | [* black] Use the flat end of a spudger to carefully pry the AirPort antenna off its socket on the AirPort card. |
| + | [* icon_caution] Pull the connector parallel to the face of the logic board, not straight up. |
Image 1
No previous image
Added
Image 2
No previous image
Added