Changes to Step #14
Edit by Spencer Pennington —
Edit approved by Spencer Pennington
- Before
- After
- Unchanged
Step Lines
| [title] Remove the back cover | |
| [* black] Grab and remove the back cover. | |
| - | [* icon_note] If |
| + | [* icon_note] If the back cover is not lifting easily, use an opening pick to separate any adhesive that may have resealed. |
| [* icon_reminder] During reassembly: | |
| [* icon_note] This is a good point to power on your phone and test all functions before sealing it up. Be sure to power your phone back down completely before you continue working. | |
| - | [* black] Use tweezers or your fingers to remove all adhesive from the back cover and the phone. Apply heat and isopropyl alcohol (90% or greater) if you're having trouble removing the adhesive. |
| + | [* icon_note] Retaining water resistance after the repair will depend on how well you reapply the back cover adhesive, but your device will lose its IP (Ingress Protection) rating. |
| + | [* black] Use tweezers or your fingers to remove all adhesive from the back cover and the phone. Use heat or isopropyl alcohol (90% or greater) and a coffee filter or lint-free cloth if you're having trouble removing the adhesive. |
| [* black] If you're using custom-cut adhesives, [guide|152862|follow this guide|new_window=true]. |