Changes to Step #6
Edit by Spencer Day —
Edit approved by Spencer Day
- Before
- After
- Unchanged
Step Lines
| [title] Remove the 5G mmWave screw | |
| - | [* icon_caution] Be very careful not to touch the cameras during this step. If you accidentally do, wipe |
| + | [* icon_caution] Be very careful not to touch the cameras during this step. If you accidentally do, wipe them with a ''clean'' microfiber or lint‑free cloth. |
| [* black] Carefully hold the front facing camera cable out of the way so you can access the mmWave antenna screw. | |
| [* red] Use a Torx Plus 3IP screwdriver to remove the 4.2 mm‑long screw securing the mmWave antenna. |