Changes to Step #7
Edit by Spencer Day —
Edit approved by Spencer Day
- Before
- After
- Unchanged
Step Lines
| [title] Remove the logic board | |
| - | [* black] Insert wisdom here. |
| + | [* black] Use a spudger to pry up the top edge of the logic board until you can grip it with your fingers. |
| + | [* black] Grip the right side of the logic board and carefully remove it, being careful that no cables get snagged (one front facing camera cable and three cables along the bottom edge). |
| + | [* icon_reminder] During reassembly, hold the front facing camera cable out of the way and lower the logic board into place, making sure the three cables along the bottom edge don't get trapped underneath. |