Fix Your Stuff Community Store

Changes to Step #6

Edit by Stephanie Bong —

Pending approval

Before
After
Unchanged

Step Lines

-[* black] This next part is a bit tricky. Take note of the slot for the spring arm and the slot for the UMD try in the the corners.
+[* black] This next part is a bit tricky. Notice the slot for the spring arm and the slot for the UMD trayy in the the corners.
[* black] Turn the PSP upside-down, so that the bottom is now facing up.
-[* black] First slide the UMD Tray into the slots on the UMD cover. Once these are in, align the spring into its slot.
+[* black] First slide the UMD tray into the slots on the UMD cover. Once these are in, align the spring into its slot.
[* black] Carefully close the PSP door, keeping the UMD tray and spring in their slots.
[* black] Insert the left side of the door first.
[* black] Now insert the right hinge.
[* black] This can be done using either your hands or a flat-head.