| | [* black] Remove the lens, battery, grip, and memory cards from the camera body. Put a body cap on to prevent dust from entering the camera body. Prepare an ESD safe work area to prevent damage to the electronics. |
|---|
| | [* icon_note] The screws in this are J0 but PH0 will fit, just use caution with the driver to avoid stripping them out. |
|---|
| | [* icon_note] There are multiple screw lengths and thread types involved in this repair. I strongly recommend a magnetic whiteboard/parts tray to keep track of where every screw comes from. Damage to the camera can result from putting the improper screw back into the wrong hole. |
|---|