Fix Your Stuff Community Store

Changes to Step #5

Edit by Claire Miesch —

Edit approved by Claire Miesch

Before
After
Unchanged

Step Lines

[* black] Pull the blue handle forwards to lock the arms.
[* black] Turn the handle clockwise 360 degrees or until the cups start to stretch.
[* icon_note] Make sure the suction cups [link|https://guide-images.cdn.ifixit.com/igi/BSluctHhVVqhGtfj.full|remain aligned with each other|new_window=true]. If they begin to slip out of alignment, loosen the suction cups slightly and realign the arms.
-[* black] Insert an opening tool under the screen when the Anti-Clamp creates a large enough gap.
+[* black] Insert an opening pick under the screen when the Anti-Clamp creates a large enough gap.
[* icon_note] If the Anti-Clamp doesn't create a sufficient gap, rotate the handle a quarter turn.
[* icon_caution] ***Don't crank more than a quarter turn at a time and wait a few seconds between turns***. Let the Anti-Clamp and time do the work for you.
[* black] ***Skip the next two steps.***