Changes to Step #17
Edit by Andrew Optimus Goldheart —
Edit approved by Andrew Optimus Goldheart
- Before
- After
- Unchanged
Step Lines
| [* black] Remove the following screws securing the front panel assembly cable bracket to the logic board: | |
| [* red] Two 1.7 mm Phillips #000 screws | |
| [* orange] One 1.2 mm Phillips #000 screw | |
| [* yellow] One 1.3 mm Phillips #000 screw | |
| + | [* icon_note] This screw tends to not be attracted to a magnetized screwdriver. Take care not to lose it when removing. |