Skip to main content

Changes to Step #1

Edit by Long Tran

Edit approved by Long Tran

Before
After
Unchanged

Step Lines

[title] Panel
-[* black] Unscrew the two underside screws holding the back of the device using a Phillips #2 screwdriver
- [* red] 10mm screws are indicated by the red marking circles.
+[* icon_caution] Unplug the power cord before you do the following steps.
+[* black] Flip the device over so the bottom is facing up.
+[* red] Remove the two 10mm screws holding the back of the device using a Phillips #2 screwdriver.