Changes to Step #1
Edit by Jorge Revelo —
Edit approved by Jorge Revelo
- Before
- After
- Unchanged
Step Lines
- | [title] Removing the Power/Fan Switch Assembly |
---|---|
- | [* red] Remove the two 10 mm phillips screws. One attaches the gold metal bracket to the heater coil housing and the other attaches the fuse holder to heater coil housing. |
+ | [* red] Remove the two 10 mm phillips screws using a #2 Phillips screw driver. One attaches the gold metal bracket to the heater coil housing and the other attaches the fuse holder to heater coil housing. |