Fix Your Stuff Community Store

Changes to Step #1

Edit by Andrew Optimus Goldheart —

Edit approved by Andrew Optimus Goldheart

Before
After
Unchanged

Step Lines

-[* black] Use a plastic opening tool to gently pry the button assembly cable up from its socket on the logic board.
-[* icon_caution] Be very careful to only pry up on the battery connector and not the socket on the logic board. If you pry up on the logic board socket, you may break the connector entirely.
+[* black] Use a spudger to gently pry the button assembly cable up from its socket on the logic board.
+[* icon_caution] Be very careful to only pry up on the connector and not the socket on the logic board. If you pry up on the logic board socket, you may break the connector entirely.