Changes to Step #6
Edit by Sam Goldheart —
Edit approved by Sam Goldheart
- Before
- After
- Unchanged
Step Lines
| + | [* black] Remove the following screws from the logic board: |
|---|---|
| + | [* red] 2.4 mm PH #000 screw |
| + | [* orange] Two 2.3 mm PH #000 screws |
| + | [* yellow] Four 2.8 mm standoff screws |
| + | [* icon_note] Use a small flathead screwdriver to remove these standoff screws. |
Image 1
No previous image
Added