Changes to Step #5
Edit by Sven Georgi —
Edit approved by Sven Georgi
- Before
- After
- Unchanged
Step Lines
| [title] Display removed | |
| - | [* black] Remove all screws |
| + | [* black] Remove all screws close to the edge of the metal support bracket in logical order. Store the screws in the same order on adhesive tape to make re-assembly easier. |
| [* black] Unplug the two flat cables of the screen from the PCB. The cable close to the power connector you just need to lift up. To release the second cable from the connector you need to flip up the white backside of this connector and slide the cable out. |